Construction Progress

Body Parts

We made a lot of progress cutting out each piece of the craft. 

On the far left is the main body, with a hole in the center cut

out for the fan. Next is the plate which is used to crate lift. It's

placed directly below the main plate. On the far right are the

pieces that will be glued to the lift plate. The function of these

are to keep more air underneath the craft, maximizing lift.

Skirt

The skirt was made of an old pool float, cut

down the middle, then cut in half. We thought

this would be a good material for the skirt because

it was strong, slightly rigid, and shaped nicely. If 

it does not work as well as we hope, we also have

a large black trash bag to use as a possible skirt 

as well.